For example, weatherrelated impacts such as hurricanes, flooding, and coastal erosion for which climate change is at least partially responsible, would require the use of new building techniques and materials to withstand adverse weather conditions.
Some of the changes take place over millions of years. This would make some places uninhabitable, trigger sea level rise that would inundate some major cities, and would create real challenges in Global warming in construction industry to feed a growing population. Such events would also influence the choice of site for construction projects.
With its population expected to grow to 6 million bythe construction sector in Singapore is expected to boom. Actual performance must be demonstrated once the building is operating. Also, this effect is further felt during maintenance of building due to significant energy use, especially heating and lightning.
To militate against this, the don recommends that lower clinker content be used in the process since about 50 per cent of Co2 emissions in the construction industry occur during the process of producing an intermediate product called clinker. The Kyoto Protocol could be criticized for having only a limited life span and also for having binding obligations only upon the Annex 1 countries.
Ekong warned that decisions made about building design, especially about infrastructure have repercussions far into the future. Also, it is recommended that increasing risk of floods need to be controlled by identifying areas that are most vulnerable to flooding and discouraging property development in those areas, by imposing regulations on planning in high risk areas, and by specifying and enforcing development setbacks for buildings, especially along water bodies area liable to flooding and for all wetlands.
For instance, he said a British study of possible effects of climate changes on buildings and construction showed that an increase in average wind speed of six per cent could damage about a million buildings in Great Britain alone, with repairs of such properties costing about two billion British pounds sterling.
From an Article by Brian BienkowskiThe Daily Climate, December 11, A new United Nations report from the Global Alliance for Buildings and Construction released today finds that in order to keep the Paris Climate Agreement goals on track, the construction industry needs to improve energy efficiency per square meter about 10 square feet by 30 percent by Realizing the potential of the buildings and construction sector needs all hands on deck — in particular to address rapid growth in inefficient and carbon-intensive building investments.
One such initiative concerns the proposal for the adoption of the International Energy Conservation Code IECC for commercial buildings, which is projected to increase the energy efficiency of new buildings by 30 percent.
The Paris Agreement aims to limit global warming to 1.
Buildings that perform better receive more stars. These fears are buoyed by the report of the Intergovernmental Panel on Climate Change IPCCwhich warned that if actions are not taken, global temperature may rise by as high as one to three per cent by This, he reckoned, may also make built environments less attractive to residents at times.
It measures actual performance against set benchmarks. Thus, any efforts taken by Australia to formally meet its obligations under the Kyoto Protocol are still at an infant stage. Also the rate of retrofitting older buildings to become more energy efficient would have to improve from the current 1 to 2 percent per year to more than 3 percent per year.This means much more climate warming gases.
The building industry of course isn’t the only cause of climate change but it does account for about a quarter of global greenhouse gas emissions. CO2 emissions from buildings and construction increased by about 1. Global Warming In Construction Industry.
THE EFFECT OF GLOBAL WARMING Introduction One of the most agent controversial topics that are discussed in the world is global warming. Global warming and its effects are real and various scientists unlock the past mysteries and analyze today's activities, they issue warnings that the future generations will be in jeopardy.
A: Global warming occurs when carbon dioxide (CO2) and other air pollutants and greenhouse gases collect in the atmosphere and absorb sunlight and solar radiation that have bounced off the earth.
Since construction equipment sends about 22 pounds of carbon dioxide into the air per gallon of diesel consumed, the topic of global warming, aka climate change, is not irrelevant to our industry.
Construction Global provides latest building and construction news, a monthly construction magazine and a construction website for companies, associations and executives globally.
How global warming affects built environment This steady rise in global temperature is known as Global warming (GW). With the construction industry tied to most sectors that are the focus.Download